RP-910A Reflective Film Anti-sticking Paper Peelability Tester is specially designed and produced for the production, quality supervision, engineering construction and supervision units to test the bending resistance of the reflective film. It has the characteristics of reasonable structure, simple operation, wide applicability, measurement safety and good reliability.

The RP-920A magnetic glass bead separator and its accessories should be stored in a dry, clean, vibration-free, flammable, and corrosive environment.

The glass bead sieving device, also called the glass bead shaper, is a special equipment for detecting the roundness of the glass beads for the reflective markings on the road surface. The RP-920 glass bead sieving device is designed and produced by Beijing Jingqu Technology Co., Ltd. for measuring the geometric characteristics of glass beads in units such as production, quality supervision, engineering construction and supervision. It has the characteristics of reasonable structure, simple and safe operation and good reliability.The structure and performance of the RP-920 glass bead sifter meets the relevant requirements for glass bead detection in my country's transportation industry standard JT/T446 "Glass Beads for Road Marking".

STT-920C Pavement Marking Glass Bead Divider is designed in accordance with the provisions of GB/T24722-2009 "Glass Beads for Pavement Marking" and is an indispensable tool for shrinking glass bead samples. It is composed of a sealed shell, a trough, a sampler, a dustpan, etc. The slope of the trough slope is not less than 60 degrees. The main features are reasonable structure, convenient use, multi-point reduction performance, strong representativeness, and can greatly improve the efficiency and quality of sample preparation. It is suitable for the reduced sampling of glass beads for uneven road markings.

The glass bead divider for road marking is designed according to the provisions of GB/T24722-2009 "Glass Beads for Road Marking", and it is an indispensable tool for shrinking glass bead samples.

After the mechanical horizontal plane calibration is adopted, the thickness of the traffic road marking is calculated by using the difference between the height and the low wheelbase, which is used for the on-site construction of the traffic marking and the acceptance of the marking.